Leading 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Leading 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Blog Article

Do not underestimate the forklift at the office. If the procedure is bad, there will be major mishaps in mins, and there are several crashes entailing forklifts.

Case 1: The forklift cargo blocked the motorist's sight, and the person in front could not be found, leading to a rolling accident.
Case 2: In order to maintain the equilibrium of the forklift when raising hefty products, the workers used their body weight as the counterweight, which nearly triggered casualties.
Case 3: The width of the forklift cargo exceeds the allowed size of the course and hangs on the roadside rack, which nearly triggers an crash.
Situation 4: Forklift is speeding up and rolls over throughout a turn.
Case 5: The forklift vehicle driver did not notice the pedestrian, and the pedestrian did not discover the forklift.
Situation 6: The forklift raises the personnel illegally, the forklift motorist does not use the safety belt, the forklift lifter falls and the motorist is squashed when the forklift surrender.
Situation 7: The forklift chauffeur did not use a seat belt and dropped from the lorry when it rolled over and was crushed.
Forklift procedure must take notice of these issues ：.

Start.
1. Prior to beginning, observe the environments, and after verifying that there are no challenges that prevent the safety and security of driving, beep the horn initially and after that begin.
2. For vehicles with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) gauge should be risk-free before starting.
3. When the forklift begins with a load, the vehicle driver needs to first confirm that the load is stable and trustworthy.
4. The beginning should be sluggish and steady.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the pole ought to be tilted backwards. .
2. Do not lift the fork too high when driving. When entering and leaving the job site or while driving, take care that there will be no barriers overhead. When the lots is taking a trip, the fork has to not be increased too expensive, which will certainly affect the security of the forklift. .
3. After discharging, the fork should be reduced to the typical driving setting before driving. .
4. When transforming, if there are pedestrians or cars nearby, the driving signal needs to be released initially. High-speed sharp turns are restricted. High-speed doglegs will certainly trigger the lorry to lose side stability and tip over. .
5. When the forklift is downhill, it is purely restricted to switch off the fire and slide, and it is restricted to brake instantly while driving with loads unless there are special scenarios.
6. When the forklift is running, it should comply with the traffic rules in the manufacturing facility and should keep a certain security range from the lorry in front. .
7. When the forklift is running, the tons must remain in the lowest position that does not hinder the driving, and the gantry must be properly slanted back. The load will not be elevated other than when piling or loading. .
8. The height of the tons should not block the chauffeur's sight. In special scenarios, when the product impacts the forward vision, drive at a low rate when turning around.
9. It is restricted to activate the ramp, neither to drive throughout the ramp. .
10. The risk-free driving rate of the forklift in the manufacturing facility location is 5 km/h, and it has to drive safely at a low speed when going into the production workshop area. .
11. When the forklift is raised, raised or driven, it is restricted for personnel to stand on the fork to hold things and play a stabilizing duty. .
12. If problems are discovered, they will be repaired and reported in a timely way, and they will never run with health problems Stand-on Electric Pallet Stacker or conceal them.

loading and dumping.
1. When fork-loading things, the distance in between both forks should be readjusted as needed to make the lots of both forks balanced and not manipulated, and one side of the product need to protest the rack. .
2. It is restricted to collaborate with a solitary fork or utilize a fork top or draw. In special circumstances, security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of filling and discharging items, the forklift must be braked with the brake. .
4. The rate of the lorry must be sluggish and steady. Take care not to roll the wheels on the dunnage, so as not to extend the rolled things and injure individuals. .
5. When utilizing a fork to fork the goods, the fork should be as deep as feasible under the load, and it must be kept in mind that the fork idea must not touch various other goods or things. The load must be supported with marginal back tilt of the gantry to ensure that the load does not slide in reverse. The pole can be tilted forward slightly when the lots is lowered to enable very easy placement of the load and removal of the forks. .
6. It is restricted Stand-on Electric Pallet Stacker to fork goods at high speed and collide with hard objects with the fork head. .
7. When the forklift is working, it is prohibited for people to stand around the fork, so as to prevent the collapse of the goods and harm people. .
8. Overwhelming is banned, and it is prohibited to utilize forks to lift employees to take part in high-altitude procedures to avoid high-altitude falling mishaps. .
9. It is not enabled to utilize the brake inertia to slip, place, round or roll objects. .
10. It is not allowed to use forks to pick, turn pallet unload.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork are in the air. Prior to leaving the forklift, you have to unload the goods or lower the fork frame.
2. Pull the parking brake take care of to dead or dispirit the hand brake switch.
3. The engine is turned off and the power is removed. (Except for unique scenarios, such as the motorist does not leave the lorry's line of sight and does not exceed 1 minute).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance ought to be checked, and fuel, lubing oil and air conditioning water must be included.
2. Inspect the security performance of starting, running and stopping.
3. Check whether the lights and horn signals are complete and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature level are regular.
5. After the forklift is running, the outside leakage should also be inspected and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You should check prior to leaving the vehicle;.
2. When you experience someone before you during driving, you should send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight ought to be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be too sharp to stop the tendency of "free switching";.
6. Running up and down the incline ought to be slow and consistent, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when worsening;.
8. When the forklift personnel lug the goods and move forward, if they run into big or hefty goods and most likely to the driver's view, they should take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Solitary fork procedure is not enabled.
2. It is not permitted to lift the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to utilize stopping force to exile round or easy-to-roll items.
7. It is not permitted to bring individuals to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on slopes
.
Parking is not permitted under the following problems.
1. Contours, slim roadways, train crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the very same length as the obstacle must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844